Skip to content
Puertas ValdénEspañolCall
Menu

Industrial doors for warehouses in Alicante

We make and install doors for industrial units, workshops, warehouses and loading bays across the province of Alicante: industrial sectional doors, large roller shutters, high-speed doors, sliding warehouse doors and personnel doors, built for daily forklift and lorry traffic.

  • Factory-direct prices
  • 3-year written warranty (5 years on motors)
  • Free quote within 24 hours
Call nowMessage us on WhatsAppGet a quote

What it involves

An industrial door works far harder than a garage door: it opens dozens of times per shift, lets forklifts and lorries through, separates areas at different temperatures and has to withstand knocks, dust and wind. Choosing the right one affects the building's energy use, how quickly loading and unloading gets done and the safety of everyone working near it.

We make and install sandwich-panel industrial sectional doors, steel-slat industrial roller shutters, fabric high-speed doors, single or multi-leaf sliding warehouse doors and personnel doors for access and emergency exits. We build them to fit the opening, with the lift type your roof allows, with vision panels or glazed sections if you need light and with the right motor for the number of cycles.

We make doors for logistics warehouses, car repair workshops, shoe factories, food warehouses, agricultural buildings and car dealerships. Before quoting, we look at how goods move, which vehicles pass through, whether there is an overhead crane or services in the roof and which areas need insulating, so we can offer you the door that fits rather than one that is more than you need.

Industrial sectional doors on a warehouse façade on an Elche industrial estate

Industrial doors: jobs we do

These are the jobs we are asked for most. If yours looks like one of them, call us and we will tell you how we would handle it.

Industrial sectional doors for warehouses

The industrial sectional door is the most complete option for a warehouse: steel sandwich panels with insulating foam that rise vertically along tracks and leave the whole opening clear, taking up no space in front or behind. It keeps out heat and noise, seals tightly against the floor with its bottom seal and stands up to daily use. We choose the track type for the available headroom, standard, high or vertical lift, so the door does not hit beams, light fittings or an overhead crane. We add vision panels, glazed sections or a wicket door and the motor your workload demands.

Large industrial roller shutters

When the opening is very large or there is no room in the roof for tracks, an industrial roller shutter is the most straightforward option: the galvanised steel slats roll up into a coil above the lintel and leave the inside of the building clear. It stands up well to knocks and break-in attempts, and copes well with wind thanks to reinforced guides and thicker slats. We make them for warehouses, heavy machinery workshops and lorry entrances, with the shaft, springs and motor sized for their weight, and a box to protect them from dust.

High-speed fabric doors for warehouses and stores

High-speed doors open and close in a few seconds, much faster than a sectional door or a roller shutter, and are used where forklifts pass constantly. Because they stay open for less time, they hold the temperature inside, keep out dust, insects and draughts and cut the risk of collisions. We install roll-up versions for internal openings between areas of the building and stacking versions for large external openings exposed to the wind. They are triggered by radar, an induction loop in the floor or a pull cord, and have a safety barrier and fabric with clear windows so you can see who is coming.

Loading bay doors

At a loading bay the door works together with the rest of the set-up. We install the dock sectional door with the opening sized to the lorry body, the fabric or inflatable dock shelter that seals around the trailer and the dock leveller that bridges the height difference between the warehouse floor and the lorry bed. We add rubber bumpers so the lorry does not hit the building and wheel guides so it parks centred. That way loading takes place under cover, without losing cold or heat and with less risk for forklifts.

Sliding doors for industrial buildings

The sliding warehouse door is the classic solution for very wide, tall openings in the façade, or when the roof is full of trusses, ducts or an overhead crane and a sectional door will not fit. The leaves hang from an overhead track and are guided at the bottom, so the floor stays free of obstacles, or they run on a floor track when they are very heavy. We make them with one, two or more leaves, in single-skin sheet or insulated sandwich panel, motorised or manual. They need a clear stretch of façade on each side as wide as the leaf that stacks there.

More jobs in this service

  • Industrial sectional door with a built-in wicket door

    A pedestrian door within the sectional door itself lets people walk in and out without opening the main door, saving energy and motor cycles. We fit it with a low threshold so nobody trips and a contact switch that stops the sectional door moving while the wicket door is open.

  • Personnel doors and exit doors for warehouses

    We make single or double steel personnel doors for the building's façade, for exits to the outside and to separate offices from the work area, with door closers, vision panels and panic bars on the exits.

  • Glazed sectional door for a car repair workshop

    In car and motorbike workshops, a sectional door with glazed aluminium panels brings daylight into the work area and lets people see inside from outside. We combine it with solid panels at the bottom, which stand up better to knocks, and a motor for opening it many times a day.

  • Vertical lift sectional door for buildings with an overhead crane

    If the building has an overhead crane, low trusses or services in the roof, we fit the sectional door with high-lift or vertical-lift tracks: the door rises close to the wall and leaves clear the area where the crane moves or ducts and light fittings run.

  • Doors for cold stores and food warehouses

    In fruit, vegetable and food warehouses we combine sectional doors with thicker insulated panels and internal high-speed doors, so the cold does not escape every time a forklift passes and the produce is not spoiled by the heat outside.

  • Self-repairing high-speed doors for forklift traffic

    If a forklift hits the curtain, a self-repairing door does not break: the fabric pops out of the guide and goes back into place on the next cycle, without stopping work. It is the option for narrow internal openings with heavy traffic and drivers in a hurry.

  • Doors for car wash tunnels and wash bays

    In car wash tunnels, wash bays and lorry cleaning buildings we install high-speed doors or roller shutters in materials that withstand water, cleaning products and constant damp, with stainless steel guides and fixings and a splash-proof motor.

  • Insulated double-wall industrial roller shutter

    When you want the toughness of a roller shutter with some insulation, we use foam-filled double-wall slats. They reduce the heat coming in through the door in summer and the noise escaping to neighbouring units, without losing impact resistance.

  • Folding doors for warehouses and hangars

    Folding doors stack their leaves on one or both sides of the opening, like the pages of a book, and leave the way completely clear in hangars and wide-span buildings where there is not enough roof or side space for another system.

  • Doors for agricultural and machinery sheds

    For farm buildings, cooperatives and agricultural machinery stores we make extra-tall doors for tractors, combine harvesters and trailers, in galvanised sheet that withstands dust and the elements, in sliding, roller or sectional versions.

  • PVC strip curtains to separate warehouse areas

    For busy internal openings we hang clear PVC strip curtains: forklifts and people pass through without opening anything, you can see what is on the other side and they hold back dust, draughts and cold loss. They are an economical alternative to a high-speed door.

  • Doors for new-build industrial units

    If you are building a new unit, we get involved before the façade is closed: we give you the opening sizes, the lintel type and the electrical requirements for each door so the building is ready and installation is straightforward, with no chasing out walls or last-minute adjustments.

  • Extra-tall doors for lorries and buses

    For bus depots, commercial vehicle workshops and buildings that take crane lorries or high-sided trucks, we make extra-tall sectional doors and roller shutters, with wind reinforcement and a motor sized for their weight and for many cycles a day.

What you get with us

  • Factory-direct prices

    We manufacture at our factory in Elche, so you deal directly with the people who make the door, with no middlemen and with the exact measurements of each opening in your building.

  • Compliant with UNE-EN 13241-1

    They comply with UNE-EN 13241-1, the product standard for industrial, commercial and garage doors, a key point for health and safety in your building.

  • Written warranty

    You get a written 3-year warranty on the door and 5 years on the motor, which matters for doors that run many cycles a day.

  • Interest-free finance

    You can spread the cost with interest-free finance, useful when you are fitting out several openings in the building at once or a complete loading bay.

How we do it, step by step

  1. Technical site survey

    We look at the opening, the roof, the overhead services, vehicle traffic and areas at different temperatures, and recommend the type of door for each opening.

  2. Quote and installation plan

    We send you a detailed quote for each opening and plan the installation with you to cause minimal disruption to your operations and your shifts.

  3. Made to measure

    We build the door with the agreed sizes, lift type, panel and accessories, and set up the motor and safety features for its duty cycle.

  4. Fitted by our own team

    Our own team, with no subcontractors, installs the tracks, panels and motor, connects the door and keeps the work area marked off during installation and tidied up afterwards.

  5. Safety testing and handover

    We check forces, the fall-arrest system, photocells and limit switches, and show your staff how to use the door before we sign the job off.

Industrial doors in Alicante province

Industry in the province of Alicante is widely spread: Elche Parque Empresarial in Torrellano, next to the airport, and the Carrús and Altabix industrial estates in Elche; Pla de la Vallonga and Agua Amarga in Alicante; Tres Hermanas in Aspe. There are logistics warehouses serving the port and the airport, the shoe industry in Elche, carpets and textiles in Crevillent and pomegranate and vegetable warehouses in the Elche countryside. Each activity calls for a different door: high-speed doors where there are forklifts, insulated sectional doors where temperature matters and tough roller shutters where budget is the priority.

The climate matters too. In summer, a single-skin south-facing door turns the building into an oven, and sandwich panels or insulated slats make a difference to the air-conditioning bill. Buildings near the sea and the port suffer from salt air, which attacks tracks, shafts and fixings unless they are galvanised or stainless. The levante and poniente winds push hard on large doors, so we calculate reinforcements and tracks for each opening. And in autumn the gota fría leaves water and mud at the entrances, so we pay close attention to the bottom seal and tell you where a drainage channel in front of the door is worthwhile.

Where we do it

Garage doors in Elche

We manufacture and install garage doors in Elche from our base in Las Atalayas: community garages in the city centre, country houses in the rural partidas, townhouses in Arenales del Sol and industrial units in Carrús and Torrellano. We also repair and maintain the door you already have.

El Raval · Altabix · Carrús · El Toscar

Garage doors in San Vicente del Raspeig

We install, motorise and repair garage doors in San Vicente del Raspeig, from the community garage of a town-centre apartment block to a villa garage in Boqueres or a workshop unit on the Canastell industrial estate. We set out from Las Atalayas with our own team, no subcontractors.

Santa Isabel · Los Girasoles · Haygón · Sol y Luz

Garage doors in Mutxamel

We install and repair garage doors in Mutxamel, from the town centre to the urbanisations of Bonalba, Valle del Sol or Río Park and the industrial units of the Riodel estate. We make every door to measure and sell it at factory-direct prices, with no middlemen.

Casco urbano · Bonalba-Cotoveta · Valle del Sol · Río Park

Garage doors in Aspe

We manufacture and install garage doors in Aspe for houses in the town centre, apartment blocks in La Coca and Vistahermosa, country properties in Huerta Mayor, El Aljau or La Ofra and industrial units on the Polígono Tres Hermanas, built to cope with the heat and dust of the Vinalopó.

El Castillo · Serranica · Colón-Santa Rita · Polvorín

Garage doors in Crevillent

We install and repair garage doors in Crevillent, from the street-level garages on the steep streets of the old town to the industrial units on the I-4 and Faima estates, the country houses of El Boch and Cachapets and the outlying villages of El Realengo and San Felipe Neri.

El Calvario · Ronda Sur · Els Arbrets · Rincón de los Pablos

Garage doors in Orihuela and Orihuela Costa

We install and repair garage doors throughout the municipality of Orihuela: the city centre beside the Segura, the farming villages of the huerta, the warehouses of Puente Alto and the urbanisations of Orihuela Costa, from Playa Flamenca to Dehesa de Campoamor.

El Rabaloche · Capuchinos · La Aparecida · Desamparados

Garage doors in Elda

We install, motorise and repair garage doors in Elda: community garages in the apartment-block neighbourhoods, ground-floor premises that were once shoe workshops, garages in single-storey houses and industrial units on Campo Alto, Finca Lacy and Torreta-Río.

San Francisco de Sales · Nueva Fraternidad · Las Trescientas · La Prosperidad

Garage doors in Petrer

We manufacture and install garage doors and gates in Petrer: garages on the steep streets of the old town, community garages in La Frontera, villas in Caprala, El Rebentó and Loma Badá, and industrial units in Salinetas, Les Pedreres and the Guirney.

Casco antiguo · La Frontera · Loma Badá · Caprala

Garage doors in Novelda

We install and repair garage doors in Novelda, from the low-rise houses of San Roque and the garages of the Barrio de la Estación to the villas of Ledua and La Serreta and the natural stone warehouses of El Fondonet and Santa Fe.

San Roque · Barrio de la Estación · Ledua · La Serreta

Garage doors in Guardamar del Segura

We install, repair and maintain garage doors in Guardamar del Segura: bungalows and townhouses in El Raso and Los Secanos, villas in El Moncayo and Pinomar, residential complexes in the town centre and industrial units on the Polígono Santa Ana, always taking into account the sand and salt air from the dunes.

El Raso · Los Secanos · El Moncayo · Els Estanys

Get a quote: industrial doors

Free quote within 24 hours, fitted in one day and a written warranty. Call us or message us on WhatsApp.

Call nowMessage us on WhatsAppGet a quote

Frequently asked questions

What people ask us most about industrial doors.

Industrial doors: your questions

Sectional, roller shutter or high-speed: which industrial door do I need?

A sectional door is the best option when insulation and a tight seal matter, as in climate-controlled warehouses or loading bays. A roller shutter is tougher and cheaper, and suits large openings and buildings that do not need insulation. A high-speed door is designed for openings with heavy forklift traffic, where the door has to stay open as briefly as possible. Many buildings combine two types: sectional on the façade and high-speed inside.

Can you install the door without stopping work in the building?

Yes. We plan the installation with you to tie up the opening for as little time as possible, work during the quietest hours and mark off the work area so forklifts can keep moving safely. Each door is installed in one day, so the opening is never left open overnight and you do not have to guard it.

Can a high-speed door be used on an external façade?

Yes. For external use we install high-speed doors in reinforced fabric with wind bars, either roll-up or stacking; stacking doors withstand wind pressure better in large, exposed openings. As fabric is not a security door, many buildings combine the high-speed door for daily work with a sectional door or roller shutter behind it that is closed at night.

What does the building need before the door is installed?

An opening with a solid lintel and sides to anchor the tracks, a power supply near the motor, single-phase or three-phase depending on the door, and space in the roof or at the sides for the chosen type. The floor at the threshold should also be level so the bottom seal closes tightly. If anything is missing, we spot it on the visit and tell you what to prepare.

Does an industrial building need a separate pedestrian door?

That depends on the activity licence project and the building's emergency exits, which your technical consultant defines. Even where it is not compulsory, it is strongly advisable for people not to use the vehicle opening: a wicket door in the sectional door or a separate personnel door avoids opening the main door, saves energy and keeps pedestrians apart from forklifts.

Other services you may need